HARRISON M550 X 2000MM GAP BED CENTRE LATHE Verified seller

19,500 $

Make an offer

Manufacturer	HARRISON
Model	M550 x 2000mm
Year	1997
Location	United Kingdom
Category	Lathes - 0 - 3000 mm
Product id	P240205161
Language	струг HARRISON M550 x 2000mm Soustruh HARRISON M550 x 2000mm drejebænk HARRISON M550 x 2000mm HARRISON M550 x 2000mm Drehmaschine τόρνος HARRISON M550 x 2000mm HARRISON M550 X 2000MM GAP BED CENTRE LATHE Torno HARRISON M550 x 2000mm Tour HARRISON M550 x 2000mm tokarilica HARRISON M550 x 2000mm HARRISON M550 x 2000mm esztergapad Tornio HARRISON M550 x 2000mm tekinimo staklės HARRISON M550 x 2000mm HARRISON M550 x 2000mm draaibank Tokarka HARRISON M550 x 2000mm torno HARRISON M550 x 2000mm strung HARRISON M550 x 2000mm HARRISON M550 x 2000mm Токарный станок strug HARRISON M550 x 2000mm HARRISON M550 x 2000mm svarv Torna HARRISON M550 x 2000mm

Details
About this seller

Specifications

Length between centers	78.74016 in
Center height	11.02362 in
Turning length	78.74016 in
Turning Ø	21.81102 in
Ø above the bed	21.81102 in
Ø above transversing slide	14.56693 in
Diameter in the gap	32.67717 in
Max workpiece weight	6281.4 lb
Spindle nose	D1-11 Camlock
Spindle bore	3.54331 in
Turning speed	1400 rpm
Spindle motor power	12.4713 HP
Overhauled	no
Tailstock	yes
Steady	yes
Type of chuck	3 jaw
-------------------
Length x width x height	3730.0 × 1160.0 × 1690.0
Weight	6612 lb
Worked hours
Hours under power
State	good
At local norms	---------
Status	under power

Description

Year 1997, Distance between centres 2000mm, Swing over bed 554mm, Swing over cross slide 370mm, Swing in gap 830mm, Spindle bore 90mm, Spindle speeds (16) 18-1400rpm. Complete with:- ANILAM 2 Axis D.R.O., 315mm 3-jaw chuck, 405mm 4-jaw chuck, 3 point stationary steady, Q.C.T.P. with Toolholders, Rapid cross & longitudinal travels, Interlocked chuck guard, Coolant, Low Volt Light.

Very Good Condition.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2007
Offers online	15
Last activity	July 6, 2024

Description

Specifications

Length between centers	78.74016 in
Center height	11.02362 in
Turning length	78.74016 in
Turning Ø	21.81102 in
Ø above the bed	21.81102 in
Ø above transversing slide	14.56693 in
Diameter in the gap	32.67717 in
Max workpiece weight	6281.4 lb
Spindle nose	D1-11 Camlock
Spindle bore	3.54331 in
Turning speed	1400 rpm
Spindle motor power	12.4713 HP
Overhauled	no
Tailstock	yes
Steady	yes
Type of chuck	3 jaw
-------------------
Length x width x height	3730.0 × 1160.0 × 1690.0
Weight	6612 lb
Worked hours
Hours under power
State	good
At local norms	---------
Status	under power

About this seller

Client type	Reseller
Active since	2007
Offers online	15
Last activity	July 6, 2024

HARRISON M550 X 2000MM GAP BED CENTRE LATHE Verified seller

Specifications

Description

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

HARRISON M550 X 2000MM GAP BED CENTRE LATHE